ZTC RAID Series mSATA Mini or Full Size to SATA III 2.5-inch Enclosure Supports RAID 0 1 and JBOD by ZTC

Use this SSD enclosure to create a RAID enclosure with two mSATA SSDs installed. RAID 0 or RAID 1 supported, along with JBOD. The enclosure has the same size as a standard 2.5-inch SATA hard drive (9.5mm thickness), which means it fits into laptops or desktops without any issue. RAID is easily configured and this enclosure supports up to 512GB mSATA capacities. Full size and half size mSATA is supported.

Highlights:

• Standard 2.5-inch (9.5mm) Form Factor Enclosure
• Supports two mSATA SSD devices
• Built-in ASM1092R high performance processor
• RAID mode switch by hardware strapping or GUI controller
• RAID mode: RAID 0 (fast) / RAID 1 (safe) / JBOD (volume)
• 3-button Hardware switch to setup RAID mode
• Green LED indicate SATA 3 host active
• Red LED indicate M.2 NGFF SSD error
• Supports SATA Reversion 3.2
• PCI Express Mini Card Electromechanical Spec. 1.2
• PCI-E Card Electromechanical Specification Revision 1.1
• Supports SFF-8201 for Form Factor of 2.5-inch Disk Drives
• PWM synchronous buck converter Power IC
• 3A maximum output current
• Short circuit protection
• In-rush current suppression
• Thermal shutdown protection
• ESD HBM (Human Body Mode)/2KV