Lindy 1m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3543537
- Part Number: 47262
| 100+ IN STOCK |
£5.16 Incl. all UK VAT and taxes
|
Ships in 11 days Shipping to United Kingdom only £ 3.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
Tripp Lite 7FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Green
IN STOCK
£ 2.64 (incl. VAT) -
C2G Unshielded Snagless Cat6 Ethernet Network Cable - Blue - 10ft
IN STOCK
£ 8.29 (incl. VAT) -
C2G 27134 Cat6 Unshielded (UTP) Snagless 14ft Patch Ethernet Cable - Gray
IN STOCK
£ 5.78 (incl. VAT) -
3FT C2G Cat6a RJ-45 Male to RJ-45 Male Snagless Shielded Network Ethernet Patch Cable - Black
IN STOCK
£ 11.56 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 7.5m – Grey
IN STOCK
£ 8.83 (incl. VAT) -
Tripp Lite 1FT RJ45 Male to RJ45 Male Cat5e 350MHz Molded Patch Cable - Grey
IN STOCK
£ 1.49 (incl. VAT) -
Tripp Lite 5FT RJ45 Cat5e 350MHz Snagless Molded Patch Cable - Yellow
IN STOCK
£ 1.56 (incl. VAT) -
Tripp Lite 20FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Orange
IN STOCK
£ 8.09 (incl. VAT) -
C2G Unshielded Snagless Cat5e Ethernet Network Cable - Gray - 14ft
IN STOCK
£ 5.10 (incl. VAT) -
StarTech.com 10 Gigabit Shielded (SFTP) Cat6a RJ45 Patch Cable 1m – Blue
IN STOCK
£ 10.07 (incl. VAT) -
35ft C2G RJ-45 Male To RJ-45 Male Cat6a Snagless Unshielded Network Patch Ethernet Cable - Green
IN STOCK
£ 32.51 (incl. VAT) -
Tripp Lite 2.13M Cat5e RJ45 350MHz Molded Patch Network Cable - Blue
IN STOCK
£ 2.78 (incl. VAT) -
6FT Tripp Lite 2 x LC To 2 x SC 10Gb Duplex Multimode 50/125 OM3 LSZH Fiber Optic Patch Cable
IN STOCK
£ 15.29 (incl. VAT) -
3FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Unshielded Patch Cable - Red
IN STOCK
£ 3.96 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 0.5m – Black
IN STOCK
£ 1.61 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 1 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |