Lindy 0.5m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3470755
- Part Number: 47261
| 100+ IN STOCK |
£4.12 Incl. all UK VAT and taxes
|
Ships in 12 days Shipping to United Kingdom only £ 5.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
C2G Shielded Snagless Cat6 Ethernet Network Cable - Black - 35ft
IN STOCK
£ 28.27 (incl. VAT) -
8FT Belkin RJ45 Male To RJ45 Male Cat6 Networking Cable - Black
IN STOCK
£ 4.24 (incl. VAT) -
C2G Cat6a Snagless Unshielded 30ft Network Patch Cable - Blue
IN STOCK
£ 25.12 (incl. VAT) -
Tripp Lite 0.91M RJ45 Left Angle Male to RJ45 Male Cat6 Gigabit Molded Patch Cable - Blue
IN STOCK
£ 6.09 (incl. VAT) -
Tripp Lite 14FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Black
IN STOCK
£ 3.76 (incl. VAT) -
Tripp Lite 25FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - Red
IN STOCK
£ 13.34 (incl. VAT) -
Tripp Lite 20FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Orange
IN STOCK
£ 7.78 (incl. VAT) -
Tripp Lite 3FT RJ45 Male Cat6 Gigabit 550Mhz Snagless Molded Patch Cable - Green
IN STOCK
£ 3.03 (incl. VAT) -
Tripp Lite 3.05M Cat6 RJ45 Left Angle Male to RJ45 Male Gigabit Molded Patch Cable - Blue
IN STOCK
£ 8.92 (incl. VAT) -
20FT Belkin RJ45 Male To RJ45 Male CAT 6 Molded Snagless Patch Cable - Green
IN STOCK
£ 13.05 (incl. VAT) -
Belkin Cat5e, 10 Base - T Cable, 304.8m (1000FT) Ethernet Networking Cable Grey
IN STOCK
£ 352.95 (incl. VAT) -
Tripp Lite 3FT RJ45 Male to RJ45 Male Cat6 UTP Patch Cable - Blue
IN STOCK
£ 5.00 (incl. VAT) -
StarTech Cat6 25ft Patch Cable - Black
IN STOCK
£ 13.33 (incl. VAT) -
C2G Cat6 Snagless Shielded 25ft Network Cable - Orange
IN STOCK
£ 19.32 (incl. VAT) -
50FT Tripp Lite LC Single Mode To LC Single Mode Duplex Fiber Optic Patch Cable - Yellow
IN STOCK
£ 27.13 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 0.5 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |