Lindy 5m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3457449
- Part Number: 47266
| 100+ IN STOCK |
£16.05 Incl. all UK VAT and taxes
|
Ships in 11 days Shipping to United Kingdom only £ 3.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
Lindy U/UTP Cat6 RJ45 Patch Cable 1m – Blue
IN STOCK
£ 2.11 (incl. VAT) -
Tripp Lite 6FT RJ45 Cat5e 350MHz Snagless Molded Patch Cable - Blue
IN STOCK
£ 2.66 (incl. VAT) -
Startech 10ft DB9 to DB25 Network Cable
IN STOCK
£ 5.03 (incl. VAT) -
Tripp Lite 1.52M Cat6 Gigabit RJ45 Right Angle Down Male to RJ45 Male Molded Patch Cable - Blue
IN STOCK
£ 8.11 (incl. VAT) -
Tripp Lite 10FT Cat6 Gigabit RJ45 Male to Male Snagless Molded UTP Patch Cable - Black
IN STOCK
£ 5.54 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Blue - 5ft
IN STOCK
£ 6.35 (incl. VAT) -
StarTech.com Shielded (SFTP) Cat6 RJ45 Patch Cable 2m – Blue
IN STOCK
£ 9.03 (incl. VAT) -
6IN C2G Cat6 RJ-45 Male To RJ-45 Male Non Booted Unshielded Ethernet Network Patch Cable - Green
IN STOCK
£ 6.99 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Yellow - 3ft
IN STOCK
£ 6.02 (incl. VAT) -
Tripp Lite 5FT RJ45 Male Cat5e 350MHz Snagless Molded UTP Patch Cable - Blue
IN STOCK
£ 2.31 (incl. VAT) -
Tripp Lite 3FT Cat6 Gigabit RJ45 Male Snagless Molded UTP Patch Cable - Blue
IN STOCK
£ 2.16 (incl. VAT) -
3FT C2G Cat6a RJ-45 Male To RJ-45 Male Snagless Unshielded Network Patch Ethernet Cable - Green
IN STOCK
£ 16.33 (incl. VAT) -
Tripp Lite 50FT ST to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
£ 31.18 (incl. VAT) -
Tripp Lite Cat5e 7ft Snagless Molded Patch Cable - Black
IN STOCK
£ 2.94 (incl. VAT) -
Tripp Lite Cat5e 3FT RJ45 Male 350MHz Snagless Molded UTP Patch Cable - Blue
IN STOCK
£ 2.05 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 5 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |