Lindy 10m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3457476
- Part Number: 47268
| 76 IN STOCK |
£26.11 Incl. all UK VAT and taxes
|
Ships in 12 days Shipping to United Kingdom only £ 5.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
1FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Unshielded Ethernet Network Patch Cable - White
IN STOCK
£ 3.31 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Black - 3ft
IN STOCK
£ 5.88 (incl. VAT) -
C2G 27162 Cat6 550MHz Snagless 7-ft Patch Networking Cable - White
IN STOCK
£ 5.17 (incl. VAT) -
65FT Tripp Lite Duplex LC Singlemode To ST Singlemode Fiber Optic Patch Cable - Yellow
IN STOCK
£ 28.55 (incl. VAT) -
C2G Unshielded Snagless Cat6 Ethernet Network Patch Cable - Red - 0.5ft
IN STOCK
£ 3.46 (incl. VAT) -
25FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Shielded Ethernet Patch Cable - Black
IN STOCK
£ 20.76 (incl. VAT) -
3FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Unshielded Patch Cable - Red
IN STOCK
£ 3.93 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Blue - 8ft
IN STOCK
£ 8.96 (incl. VAT) -
Tripp Lite 7FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Green
IN STOCK
£ 2.62 (incl. VAT) -
5FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Ethernet Patch Cable - Red
IN STOCK
£ 3.60 (incl. VAT) -
C2G Unshielded Snagless Cat6 Ethernet Network Cable - Blue - 20ft
IN STOCK
£ 9.75 (incl. VAT) -
3FT C2G Cat6a RJ-45 Male to RJ-45 Male Snagless Shielded Network Ethernet Patch Cable - Black
IN STOCK
£ 9.18 (incl. VAT) -
C2G Unshielded Non-Booted Cat6 Ethernet Network Cable - Yellow - 5ft
IN STOCK
£ 4.17 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 0.5m – Red
IN STOCK
£ 1.71 (incl. VAT) -
StarTech 7FT RJ45 Male to RJ45 Male Cat5e Snagless Patch Cable - Gray
IN STOCK
£ 5.72 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 10 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |