Lindy 3m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3457442
- Part Number: 47265
| 100+ IN STOCK |
£10.52 Incl. all UK VAT and taxes
|
Ships in 8 days Shipping to United Kingdom only £ 5.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
Tripp Lite 30FT RJ45 Male to RJ45 Male Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable - Blue
IN STOCK
£ 33.96 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 3m - Black
IN STOCK
£ 3.24 (incl. VAT) -
Tripp Lite 6FT ST to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
£ 12.90 (incl. VAT) -
50FT C2G Cat5e RJ-45 Male To RJ-45 Male Snagless Shielded Ethernet Network Patch Cable - Black
IN STOCK
£ 31.16 (incl. VAT) -
C2G Snagless Unshielded Slim Cat6 Ethernet Network Cable - Yellow - 7ft
IN STOCK
£ 6.97 (incl. VAT) -
6FT C2G RJ-45 Male To RJ-45 Male Cat5e Snagless Unshielded Ethernet Patch Cable - Gray
IN STOCK
£ 3.88 (incl. VAT) -
Tripp Lite Cat6 50ft Snagless Molded Patch Cable - Black
IN STOCK
£ 21.70 (incl. VAT) -
Tripp Lite 15FT Cat6 Gigabit RJ45 Male Snagless Molded UTP Patch Cable - Black
IN STOCK
£ 5.67 (incl. VAT) -
Tripp Lite 15FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Green
IN STOCK
£ 6.93 (incl. VAT) -
1FT Belkin RJ45 Male To RJ45 Male Unshielded Twisted CAT6 Networking Cable - Yellow
IN STOCK
£ 1.65 (incl. VAT) -
C2G Cat6 10 ft Snagless Network Patch Ethernet Cable - Blue
IN STOCK
£ 6.41 (incl. VAT) -
C2G Shielded Snagless Cat5e Ethernet Network Cable - Gray - 14ft
IN STOCK
£ 13.91 (incl. VAT) -
Tripp Lite Cat5e 50ft Snagless Molded Patch Cable - Yellow
IN STOCK
£ 15.80 (incl. VAT) -
7FT C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Shielded Ethernet Patch Cable - Black
IN STOCK
£ 12.57 (incl. VAT) -
Tripp Lite 25FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - Red
IN STOCK
£ 13.68 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 3 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |