Lindy 2m RJ45 S/FTP LSZH Network Cable, Grey by Lindy
- Be the first to review
- Item Number: FD3344583
- Part Number: 47264
| 100+ IN STOCK |
£7.62 Incl. all UK VAT and taxes
|
Ships in 8 days Shipping to United Kingdom only £ 2.99! |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)andnbsp; andnbsp;
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
See product description
Similar Products
-
14FT Belkin Rj45 Male to RJ45 Male Cat6 Networking Cable - Yellow
IN STOCK
£ 6.71 (incl. VAT) -
Tripp Lite 150FT LC to LC Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
£ 65.20 (incl. VAT) -
C2G Shielded Snagless Cat5e Ethernet Network Patch Cable - Red - 10ft
IN STOCK
£ 10.85 (incl. VAT) -
C2G Cat6 550MHz 2.1 Meter (7 FT) Snagless Networking Patch Ethernet Cable Black
IN STOCK
£ 5.17 (incl. VAT) -
Tripp Lite 10FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Grey
IN STOCK
£ 5.41 (incl. VAT) -
Tripp Lite 20FT RJ45 Male Cat6 Gigabit Snagless Molded Patch Cable - Blue
IN STOCK
£ 8.03 (incl. VAT) -
6IN C2G RJ-45 Male To RJ-45 Male Cat6 Snagless Unshielded Slim Ethernet Network Patch Cable - Black
IN STOCK
£ 4.65 (incl. VAT) -
Startech 6in CAT6a Snagless RJ-45 Ethernet Cable w/Strain Relief - Gray
IN STOCK
£ 3.50 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 5m – Black
IN STOCK
£ 5.21 (incl. VAT) -
Tripp Lite 20FT RJ45 Male Cat6 Gigabit Snagless Molded UTP Patch Cable - Black
IN STOCK
£ 8.03 (incl. VAT) -
Tripp Lite 5FT RJ45 Right Angle Up Male to RJ45 Male Cat6 Gigabit Molded Patch Cable - Blue
IN STOCK
£ 7.94 (incl. VAT) -
C2G Unshielded Snagless Cat6 Network Crossover Patch Cable - Red - 7ft
IN STOCK
£ 18.49 (incl. VAT) -
Tripp Lite 3FT RJ45 Male RJ45 Male Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable - Grey
IN STOCK
£ 7.97 (incl. VAT) -
Tripp Lite 14FT RJ45 Male Cat5e 350MHz Snagless Molded Patch Cable - Black
IN STOCK
£ 3.89 (incl. VAT) -
StarTech.com Shielded (SFTP) Cat6 RJ45 Patch Cable 1m – Black
IN STOCK
£ 8.12 (incl. VAT)
Details
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.
Specifications
| TYPE | Cat7 |
| LENGTH | 2 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | SF/UTP (S-FTP) |