1Gb A-Data PC3200 ECC Registered DDR RAM module by Adata
- Be the first to review
- Item Number: 10022
- Part Number: SCXGC1A18
No longer available. See alternative options
Details
The A-DATA DDR400 ECC/Registered DIMM is a Double Data Rate SDRAM high-density module for server and workstation. It consists of 18pcs CMOS Double Data Rate SDRAMs in 66 pin TSOP-II 400mil packages, 2pcs drive ICs for input control signal, 1pcs PLL, and a 2048 bits serial EEPROM on a 184-pin printed circuit board.
The DDR400 ECC/Registered DIMM is a dual in-line memory module and is intended for mounting into 184-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Full specifications available from A-Data here.
The DDR400 ECC/Registered DIMM is a dual in-line memory module and is intended for mounting into 184-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Full specifications available from A-Data here.
Specifications
| CAPACITY | 1GB |
| STANDARD | PC3200 |
| SINGLE MODULE OR DUAL KIT | Single module |
| MEMORY SPEED | 400MHz (DDR400) |
| CAS LATENCY | CL2.5 |
| VOLTAGE | 2.6V |
| ERROR CHECKING | ECC Error Checking |
| FEATURES | 6-layer PCB, ECC, Registers |
| REGISTERED | Buffered / Registered |
| TECHNOLOGY | 184-pin DDR SDRAM |
| CONFIGURATION | Double sided module with 18 64Mx8 chips |
| PACKAGING | Retail packaging |
| WARRANTY | Lifetime |