Tripp Lite 0.61M RJ45 Up-Angle Male to RJ45 Down-Angle Male Cat6 Gigabit Molded Slim UTP Ethernet Cable - Blue
| IN STOCK |
75FT C2G Cat6a RJ-45 Male To RJ-45 Male Snagless Unshielded UTP Network Patch Ethernet Cable - Gray
| IN STOCK |
C2G Cat5E 350MHz Snagless Patch Cable Black 2.1 Meter (7 FT) Networking Cable Black
| IN STOCK |
1FT C2G Cat5e RJ-45 Male To RJ-45 Male Snagless Unshielded Network Patch Cable - Green
| IN STOCK |
C2G Shielded Snagless Cat6 Ethernet Network Cable - Green - 3ft
| IN STOCK |
10FT C2G RJ-45 Male To RJ-45 Male Cat6 Ethernet Patch Cable - Green
| IN STOCK |
C2G Shielded Snagless Cat6 Ethernet Network Cable - Black - 35ft
| IN STOCK |
Tripp Lite 30FT RJ45 Male to RJ45 Male Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable - Black
| IN STOCK |
Tripp Lite 3FT ST to ST Duplex Singlemode 8.3/125 Fiber Patch Cable - Yellow
| IN STOCK |
C2G Shielded Snagless Cat6 Ethernet Network Cable - Yellow - 3ft
| IN STOCK |
C2G Snagless Unshielded Cat5e Ethernet Network Cable - Blue - 15ft
| IN STOCK |
C2G Unshielded Snagless Cat5e Ethernet Network Cable - Yellow - 3ft
| IN STOCK |
C2G 27154 Cat6 550MHz 14ft Snagless Patch Cable - Black
| IN STOCK |
C2G 27134 Cat6 Unshielded (UTP) Snagless 14ft Patch Ethernet Cable - Gray
| IN STOCK |
20FT Belkin RJ45 Male To RJ45 Male CAT 6 Molded Snagless Patch Cable - Green
| IN STOCK |
Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX applications. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants.
The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the receiver at the other end of the fiber.
These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber.
- Use Singlemode Transceivers on Multimode Fiber Backbones
- Offsets the Singlemode Laser launch from the center of a Multimode fiber
| LENGTH | 2m |
| LEFT CONNECTOR | 2 x SC |
| RIGHT CONNECTOR | 2 x SC |
| COLOR | Yellow, Orange |
| WARRANTY | Lifetime manufacturers warranty |