Coollaboratory Liquid Ultra + Cleaning kit by CoolLaboratory

I loved the product and would highly recommend it.

Wouldn't recommend anything else for delidding a CPU and expect such a huge drop in temperature

It takes 5 days to come to Turkey but it is hard to apply

I have tried this paste onto a Pentium 6000 and the result is upper average , it is not high as I expeted though, meanwhile it demands to be very careful and for a laptop it is not quit easy , I would recommend it for a desktop PC rather.

Great product

Hi I cleaned my AMD 6100 FX with cleaning kit, did a good job, applied the special grease with supplied brush, fitted my new CPU cooler, all secured and rebooted my system. It did not beep or POST all Fans working but no graphics, so I shut down after 60 seconds at the most. Was busy so left it over night, when I dissembled it, there was a pile of black soot like powder (applied grease) and the top layer of the CPU had delaminated showing aluminium and graphite....basically cooked in 60 seconds. Therefore I cannot recommend this product all work carried out with anti static wrist band earthed and by instruction. Not being an expert it could just be CPU cooked ??? But worked fine before disassembled.

best of all the cpu cooler pastes i have ever used, along with deliding and applying this paste on the dye and on tim reduced heat by 10c, little hard to apply on copper surfaces, extremly satisfied.

This paste is really the best I have ever used! Easy to apply and then this great performance, 8 degrees better then my last silicone TIM. I´m convinced - TIM with liquid metal are much better then everything else!